Canature RO Membrane 4040-8040

SKU: Canature 4040-8040

0₫

Thông số kỹ thuật

Product Introduction

Canature RO membrane is widely used in water treatment and material separation , while improving impact resistance and anti - pollution .

Specifications specify basic structure , type , performance , packaging , transportation , storage and precautions .

Mô tả

Membrane element image :

Operational Limits

Film type ................................................................................ Polyamide thin film blend

Maximum operating temperature ........................................ 113°F(45°C)

Maximum operating pressure .......................................... 600psi(41bar)

Maximum pressure drop ................................................ 15psi(1.0bar)

Maximum pressure drop for each element ..................... 15psi ( 0.1Mpa)

PH range, continuous operation .............................. 3- 10

pH Range, Short Term Activity (30 min) ............... 2- 12

Maximum Feed Sludge Density Index (SDI) .................. SDI 5

Free Chlorine Tolerance ......................................... ＜0.1ppm

Maximum temperature for continuous operation above pH 10 is 95°F(35°C) ；
Under certain conditions, the presence of free chlorine and other oxidizing agents

will cause premature membrane failure. Since oxidation damage is not covered by warranty, Canature recommends removing residual free chlorine by pre-treatment before contact with the membrane.

Product packaging

RO membrane is vacuum packed in polyethylene bag and has corresponding label

Product Transportation and Storage

Do not add any harmful chemical agents to the film composition during storage.

The place to store membrane elements must be dry, cool, and out of direct sunlight.

The temperature range should be 0-40°C during transportation and storage.

It is strictly forbidden to throw the package during transportation .

Attention

Each membrane element has passed the test and preservation treatment with 1.0% sodium hydrogen sulfite (will add 10% propylene glycol anti-freeze solution in winter), vacuum packed, then packed in carton. To avoid the growth of microorganisms, we recommend soaking the element and using a protective liquid including 1.0% sodium hydrogen sulfite (from RO membrane).

When the element is used for the first time, the first permeate tank from the RO membrane element must be removed.

No harmful chemical agents are added to the membrane composition during operation.

Minh Thu is a leading supplier in Vietnam in the field of manufacturing filtration systems and water treatment systems. And is a level I distributor of imported products of Canature Group in Vietnam.

Hotline: 1900 63 30 29